Tenda S110PC 10-Port PoE Switch – 8-Port PoE Lite + 2 Uplink Ports for Surveillance & AP Networks

A versatile PoE switch is provided by the Tenda S110PC, designed especially for small-enterprise, retail, or security camera networks. It includes eight data/PoE ports and two data-only uplink ports, allowing both power delivery and network connectivity across multiple devices without needing separate power supplies. The switch supports IEEE 802.3af/at standards so various PoE-powered devices such as IP cameras, access points, or VoIP phones may be connected seamlessly.

Performance has been optimized with a non-blocking backplane, which ensures full throughput without packet loss under typical load. Features including QoS priority on key ports, VLAN isolation (one-key VLAN), and extended cable reach up to 250 meters are supported, so critical traffic may be prioritized and installation flexibility is maintained. Protection mechanisms such as 4 kV surge protection and short-circuit/overload safeguards are included, making operation safer in both indoor and semi-exposed environments.

Key Features and Explanations

• Eight PoE + Two Uplink Ports: Eight ports power and carry data to devices directly, two ports serve as network uplinks to routers or NVR for monitoring systems.

• IEEE 802.3af/at PoE Compatibility: Devices that require standard PoE or higher power can be supported safely.

• One-Key VLAN / Network Isolation & Extended Reach: Simple toggle of VLAN isolation helps secure local subnets; support for up to 250 m cable runs allows flexibility in installation.

• QoS Priority Ports: Specific ports may be prioritized so video streams or surveillance feeds are delivered without latency or jitter.

• Surge / Lightning Protection: 4 kV protection built-in to guard against electrical spikes or storms, enhancing durability.

• Unmanaged Plug-and-Play Operation: No configuration is required; it works as soon as power and cables are connected.

Specifications

• Compliance: IEEE 802.3 / IEEE 802.3u / IEEE 802.3x

• Ports: 8 × 10/100 Mbps RJ-45 (Data + PoE), 2 × 10/100 Mbps RJ-45 (Data only)

• PoE Standard: IEEE 802.3af/at supported (on the 8 PoE ports)

• Total PoE Budget: ~75-80 W for all PoE ports combined

• Backplane Capacity: 2 Gbps non-blocking wire-speed forwarding

• MAC Address Table Size: ~1,000 entries

• Forwarding Rate: ~1.49 million packets per second (Mpps)

• Protection: 4 kV surge protection; supports short-circuit, overload, over-voltage protection

• Cable Reach: Supports up to 250 meters in extended mode (for certain cabling/environmental conditions)

• Power Input: AC 190-240 V, 50/60 Hz

• Dimensions: Approx. 175 × 127 × 43 mm

• Mounting: Desktop or wall-mountable form factor

• Operating Temperature: 0 °C to 40 °C

• Storage Temperature: -40 °C to 70 °C

• Humidity: Operating 10-90% RH non-condensing; Storage 5-90% RH non-condensing

Conclusion

Dependable power-and-data delivery is enabled by the Tenda S110PC in setups where multiple PoE devices are needed—like CCTV, WiFi access points, or small retail networks. It excels where installation flexibility, network reliability, and safety features are required. For small-scale but demanding network environments, this switch provides a balanced mixture of performance, protection, and ease of deployment.