Tenda OAP1200 AC1200 Dual-Band Outdoor Access Point – Gigabit PoE, 1167 Mbps

A robust outdoor wireless access point is delivered by the Tenda OAP1200, designed to provide fast dual-band WiFi plus gigabit Ethernet for demanding outdoor networking. Featuring AC1200 standards, the device is capable of simultaneous 2.4 GHz and 5 GHz transmission that reaches up to 1167 Mbps in total, making it suitable for high-bandwidth applications like outdoor surveillance, guest WiFi in outdoor venues, or long-range wireless bridging. With two external high-gain antennas, strong signal is maintained over extended distances, even in open-air conditions.

The enclosure is weatherproof, rated IP65, preventing damage from dust and water jets, and protection has been built in for electrical surge events. Power over Ethernet (PoE) support is included, simplifying deployment since power and data can be carried over a single cable. Mounting flexibility is provided with both wall and pole mounting hardware. Reset button and LED indicators are included for easy installation and status monitoring in outdoor or semi-outdoor settings.

Key Features and Explanations

• Dual-Band AC1200 Wireless: Enables concurrent transmission over 2.4 and 5 GHz bands, reducing interference and balancing load between devices for smoother connections.

• High-Gain External Antennas: Two omni-directional antennas improve signal reach and wireless coverage outdoors or in spaces with obstacles.

• Gigabit Ethernet & PoE Support: Ensures that high wired speeds are preserved and that power delivery is simplified using PoE, eliminating nearby power outlets.

• Weatherproof Design with Surge Protection: IP65 protection shields against dust and rain, and built-in surge protection safeguards electronics against lightning and voltage spikes.

• Flexible Mounting Options: Designed for both wall and pole mounting to suit varied outdoor installation environments.

• Low-Power Operation with Practical Features: Power consumption is moderate, and features like a reset button and status LED assist in installation and troubleshooting.

Specifications

• Wireless Standard: IEEE 802.11 a/b/g/n/ac

• Maximum Wireless Rate: 1167 Mbps combined (≈300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz)

• Antennas: 2 external high-gain omni-directional antennas (≈ 5 dBi each)

• Interface: 1 × Gigabit RJ-45 Ethernet port (PoE powered)

• Enclosure Rating: IP65

• Power Consumption: ~11.5 Watts under typical load

• Mounting: Wall mountable and pole mountable hardware included

• Reset Button: 1 reset button for factory reset

• LED Indicators: System status LED

• Operating Modes: Access Point mode; other modes depending on firmware (e.g. Repeater / Bridge)

• Operating Temperature: -30 °C to +60 °C

• Storage Temperature: -40 °C to +70 °C

• Humidity: Non-condensing standard ranges for outdoor use

Conclusion

The Tenda OAP1200 is well suited for outdoor network extension where both high throughput and environmental durability are required. It performs reliably in harsh weather, supports strong, dual-band coverage, and simplifies installation with its PoE and mounting flexibility. For setups involving outdoor guest areas, remote monitoring, or bridging between structures, a solid wireless backbone is provided by this access point.